7 Stage Filter Replace-RO+DI Resin+UV Bulb (2pin2end 6 watt)

This package is for a 7 Stage RO System with one RO Membrane, one Sediment Filter, two Carbon Block filters, one- 1 1/2 lb. bag of DI Resin, one UV Bulb 2 pins 2 ends 6 watt (picture is not correct), and one inline Post Carbon filter

Note 1: The pricing listed above is for this membrane/filter package with a 50 gallon per day RO membrane. The RO membrane capacity is your choice and the price for the system will vary by your selection of a RO membrane capacity from the option above.

Note 2: The micron rating for the filters is your choice - click on the Sediment Micron and Carbon Micron options above and make your selection. Carbon Filter end cap color will vary by micron rating.

Note 3: This sale is for one ( 1 ) Post Carbon filter, your choice of Quick Connect or FPT 1/4" Fitting. When the buyer does not make a selection, we ship Quick Connect.

Note 4: This sale includes a 1 gallon per minute UV bulb - we ship a 1 gpm UV Bulb with 2 pins on 2 ends and it is a 6 watt bulb - if you have a 1 gallon UV Bulb with different pins locations and different watts, please contact us.

Note 5: This package includes a 1 1/2 lb. bag of Non Colored (Nuclear) DI resin

This RO membrane/filter package will provide top quality water from your Reverse Osmosis system. This is a quality package from a company with over 24 years of water experience and over 1,100 water items listed here on this web site.

---

The Package includes the following:

1) One (1) Reverse Osmosis membrane - you may select the RO membrane sizes from the drop down option - RO membrane prices will vary by membrane size.

2) two (2) carbon block filters

3) one (1) sediment filter

4) one (1) quick connect inline carbon (polishing filter)

5) one (1) 1 1/2 lb. bag of Nuclear DI Resin

6) one (1) 1 gallon per minute UV bulb (2 pins on 2 ends and it is a 6 watt bulb)

---

CSM Membrane Elements

CSM reverse osmosis membrane elements for home drinking water are the among industry's most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. CSM elements are shipped dry for convenient handling and long shelf-life. Dry type elements are vacuum leak tested using the Sandiego Protocol so that the performance shall satisfy their specifications. These elements are NSF/ANSI Standard 58 listed.

SPECIFICATIONS: General Features







1. The stated product performance is based on data taken after 30 minutes of operation at the following test conditions: * 250 mg/L NaCl solution at 60 psig applied pressure * 77 degrees F (25 C) * pH 6.5-7.0

2. Dry type elements are vacuum leak tested using the San Diego Protocol.

3. All elements are packaged in a polyethylene bag containing 1.0% SBS (sodium bisulfite) solution.

---

Membrane type: Thin-Film Composite

Membrane material: Polyamide (PA)

Element configuration: Spiral-Wound, Tape Wrapping

---

Dimensions -









A) Diameter of Center Feed Post

B) Length from end of feed post to membrane wrap

C) Over-all length from end of feed post to end of Permeate post

D) Diameter of membrane wrap